Our CAMCO Industrial Lubricants Protect Your Gears from Burnout

Gear

When it comes to hydraulic applications, CAMCO industrial lubricants make your machinery work reliably and last for years. Here’s what we recommend:

Light Gears

CAMCO FMO-8 Series

CAMCO® FMO-8 Series

A polyalphaolefin (PAO) food grade hydraulic, gear, reciprocating air compressor oil.

Product Description

CAMCO® FMO-8 Series are high quality performance H-1 NSF food grade gear and bearing oils. The CAMCO FMO 8 Series has excellent thermal and oxidative stability providing reliable performance and extending oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.

CAMCO® FMO 8 Series are custom-blended polyalphaolefin (PAO) synthetic hydrocarbon oils giving improved lubrication at high and low temperatures, reduced volatility and compatibility with mineral oils and equipment designed for use with mineral oils. Excellent shear stability, as the synthetic requires no VI improvers producing no excessive loss in viscosity due to mechanical shearing. Good antiwear properties promote reduced downtime due to unscheduled maintenance and savings from reduced replacement part costs.

Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and increased equipment reliability.

Authorized by USDA for use in Federally inspected meat and poultry plants. Complies with FDA 21CFR 178.3570 – Lubricants with Incidental Food Contact.

CAMCO® FMO-8-SERIES - TYPICAL PROPERTIES *

Viscosity @ 40°C cs ASTM D445 31.4 46.9 68.5
Viscosity @ 100°C cs 6.0 7.9 10.4
Viscosity @ 100°F 34.3 51.5 75.7
Viscosity @ 210°F 6.1 8.1 10.7
Viscosity Index ASTM D2270 140 139 140
Pour Point °F (°C) ASTM D97 -87 (-66) -76 (-60) -60 (-51)
Flash Point, C.O.C., °F(°C) 464(240) 514(268) 519(268)
Fire Point, C.O.C., °F(°C) 514(268) 554(290) 568(298)
Specific Gravity, ASTM D1298 0.826 0.829 0.835
Demulsibility, 10 minutes 40-39-1 -- 40-39-1
Pump Wear, total ring & vane
Weight loss, mg. ASTM 28810
10 -- 10
Foam Test, ASTM D892,
Sequence I, II, III
Nil -- Nil
Rust Prevention, ASTM D665,
Distilled water
Pass -- Pass
Copper Strip Corrosion, three hrs.
@ 212°F, ASTM D130
1 -- 1

CAMCO® FMO-8-SERIES - TYPICAL PROPERTIES *

Viscosity @ 40°C cs ASTM D445 100.3 147.7 217.4
Viscosity @ 100°C cs 13.7 18.2 24.4
Viscosity @ 100°F 111.4 164.8 243.61
Viscosity @ 210°F 14.1 18.7 25.12
Viscosity Index ASTM D2270 138 138 141
Pour Point °F (°C) ASTM D97 -55(-52) -49(-45) -46(-43)
Flash Point, C.O.C., °F(°C) 521(271) 530(277) 535(279)
Fire Point, C.O.C., °F(°C) 574(301) 580(304) 585(307)
Specific Gravity, ASTM D1298 0.839 0.845 0.846
Demulsibility, 10 minutes 40-39-1 -- 40-39-1
Pump Wear, total ring & vane
Weight loss, mg. ASTM 28810
10 -- 10
Foam Test, ASTM D892,
Sequence I, II, III
Nil -- Nil
Rust Prevention, ASTM D665,
Distilled water
Pass -- Pass
Copper Strip Corrosion, three hrs.
@ 212°F, ASTM D130
1 -- 1

* These values are not intended for use in preparing specifications.

CAMCO® FMO-8-SERIES - TYPICAL PROPERTIES *

Viscosity @ 40°C cs ASTM D445 320.0 392.0
Viscosity @ 100°C cs 33.0 38.8
Viscosity @ 100°F 359.9 441.6
Viscosity @ 210°F 34.0 40.0
Viscosity Index ASTM D2270 145 147
Pour Point °F (°C) ASTM D97 -38(-39) -35(-37)
Flash Point, C.O.C., °F(°C) 540(282) 545(285)
Fire Point, C.O.C., °F(°C) 592(311) 595(313)
Specific Gravity, ASTM D1298 0.850 0.852

* These values are not intended for use in preparing specifications.

Revised 04/16

Extreme Pressure Gears

CAMCO 92-HT Series

CAMCO® 92-HT Series

CAMCO® 92-46-HT and CAMCO® 92-68-HT are fully formulated gear and bearing lubricants based on a semi-synthetic hydrocarbon basefluid. The CAMCO® 92-HT Series gear and bearing lubricants have excellent thermal and oxidative stability, combined with superior gear load carrying ability.

The semi-synthetic hydrocarbon base fluid has proved in extensive field evaluations to give extended life and overall economic benefits. These lubricants have high viscosity indexes, high film strength, and excellent mechanical shear resistance even in heavily loaded gear applications. Additives provide superior oxidative stability, corrosion protection and load carrying ability. Field test reports state that lower operating temperatures are possible due to reduction in heat build-up due to friction. The reduced friction may also reduce horsepower requirements up to five percent depending on other operating and environmental conditions.

Revised 9/16

TYPICAL PROPERTIES *

Viscosity: @ 40°C cs ASTM D445 47.0 65.3 102
Viscosity: @ 100°C cs 7.0 8.71 10.3
Viscosity: @ 100°F 51.7 72.81 115.7
Viscosity: @ 210°F 7.3 8.94 10.6
Viscosity Index ASTM D2270 100 106 78
Density, lb/gal, 60°F 7.2 7.17 7.41
Pour Point °F (°C) ASTM D97 0(-18) -27(-33) 10.4(-12)
Flash Point, C.O.C., °F(°C) ASTM D92 440(226) 450(232) 520(271)
Fire Point, C.O.C., °F(°C) ASTM D92 450(232) 490(254) 550(287)
Specific Gravity, ASTM D1298 0.864 0.86 0.87

* These values are not intended for use in preparing specifications.

TYPICAL PROPERTIES *

Viscosity: @ 40°C cs ASTM D445 140 218.42 308.98
Viscosity: @ 100°C cs 14 22.09 30.33
Viscosity: @ 100°F 155 246.69 348.70
Viscosity: @ 210°F 15 22.76 31.28
Viscosity Index ASTM D2270 100 122 135
Density, lb/gal, 60°F 7.24 7.21 7.21
Pour Point °F (°C) ASTM D97 10.4(-12) 5(-15) 5(-15)
Flash Point, C.O.C., °F(°C) ASTM D92 515(268) 500(260) 460(237)
Fire Point, C.O.C., °F(°C) ASTM D92 530(276) 510(265) 465(240)
Specific Gravity, ASTM D1298 0.870 0.866 0.861

* These values are not intended for use in preparing specifications.

TYPICAL PROPERTIES *

Viscosity: @ 40°C cs ASTM D445 440 680
Viscosity: @ 100°C cs 32.5 38.3
Viscosity: @ 100°F 505 793.8
Viscosity: @ 210°F 33.6 39.7
Viscosity Index ASTM D2270 107 93
Density, lb/gal, 60°F 7.3 7.264
Pour Point °F (°C) ASTM D97 -10(-23) 15.8(-9)
Flash Point, C.O.C., °F(°C) ASTM D92 575(302) 480(249)
Fire Point, C.O.C., °F(°C) ASTM D92 620(327) 535(279)
Specific Gravity, ASTM D1298 0.88 0.87

* These values are not intended for use in preparing specifications.

CAMCO FMO-7 Series

CAMCO® FMO-7 Series

PRODUCT DESCRIPTION

CAMCO® FMO-7 Series is a fully formulated synthetic gear and bearing lubricant based on synthetic hydrocarbons. The CAMCO® FMO-7 Series gear and bearing lubricants have excellent thermal and oxidative stability, combined with superior gear load carrying ability.

The synthetic hydrocarbon base fluid has proved in extensive field evaluation to give extended service life and overall economic benefits. Synthetic hydrocarbons combine high viscosity indexes, high film strength and excellent mechanical shear resistance even in heavily loaded applications. Additives provide superior oxidative stability corrosion protection and load carrying ability. Field test reduction in heat build-up due to friction. The reduced friction may also reduce horsepower requirements up to ten percent depending on other operating and environmental conditions. Other advantages include improved cold temperature fluidity. Good high temperature oxidation and thermal stability (operating limits are typically 100°F higher than mineral oils). Low volatility and compatibility with mineral oils.

Authorized by USDA for use in Federally inspected meat and poultry plants (H-1). Complies with FDA 21 CFR 178.3570 – Lubricants with Incidental Food Contact.

TYPICAL PROPERTIES *

Viscosity: @ 40°C cs ASTM D445 6.42 12.41 16.8
Viscosity: @ 100°C cs 2.08 3.14 3.8
Viscosity: @ 100°F 6.80 13.34 18.2
Viscosity: @ 210°F 2.11 3.19 3.9
Viscosity Index ASTM D2270 127 116 120
Density, lb/gal, 60°F 6.66 6.78 6.82
Pour Point °F (°C) ASTM D97 -92(-69) -94(-70) -98(-72)
Flash Point, C.O.C., °F(°C) ASTM D92 330(166) 380(193) 432(222)
Fire Point, C.O.C., °F(°C) ASTM D92 340(171) 390(198) 478(248)
Specific Gravity, ASTM D1298 0.800 0.814 0.818

* These values are not intended for use in preparing specifications.

TYPICAL PROPERTIES *

Viscosity: @ 40°C cs ASTM D445 62.9 100.3 147.7
Viscosity: @ 100°C cs 9.6 13.7 18.2
Viscosity: @ 100°F 75.7 111.4 164.8
Viscosity: @ 210°F 10.7 14.1 18.7
Viscosity Index ASTM D2270 140 138 138
Density, lb/gal, 60°F 6.96 6.99 7.04
Pour Point °F (°C) ASTM D97 -60(-51) 55(-52) -49(-45)
Flash Point, C.O.C., °F(°C) ASTM D92 519(209) 574(301) 530(277)
Fire Point, C.O.C., °F(°C) ASTM D92 568(298) 574(301) 580(304)
Specific Gravity, ASTM D1298 0.835 0.839 0.845

* These values are not intended for use in preparing specifications.

TYPICAL PROPERTIES *

Viscosity: @ 40°C cs ASTM D445 217.4 320.0 392.0
Viscosity: @ 100°C cs 24.4 33.0 38.8
Viscosity: @ 100°F 243.6 359.0 441.6
Viscosity: @ 210°F 25.1 34.0 40.0
Viscosity Index ASTM D2270 141 145 147
Density, lb/gal, 60°F 7.05 7.08 7.10
Pour Point °F (°C) ASTM D97 -46(-43) -38(-39) -35(-37)
Flash Point, C.O.C., °F(°C) ASTM D92 535(307) 540(282) 545(285)
Fire Point, C.O.C., °F(°C) ASTM D92 585(307) 592(311) 595(313)
Specific Gravity, ASTM D1298 0.846 0.850 0.852

* These values are not intended for use in preparing specifications.

TYPICAL PROPERTIES *

Viscosity: @ 40°C cs ASTM D445 663.3
Viscosity: @ 100°C cs 61.1
Viscosity Index ASTM D2270 160
Copper Corrosion, ASTM D130 24th as 212°F, (100°C) lb.
Rust Test, ASTM D665, distilled water Pass
Density, lb/gal, 60°F 7.09
Pour Point °F (°C) ASTM D97 <-30 (<-34)
Flash Point, C.O.C., °F(°C) ASTM D92 530(277)
Fire Point, C.O.C., °F(°C) ASTM D92 640(338)
Specific Gravity, ASTM D1298 0.851

* These values are not intended for use in preparing specifications.

CAMCO Pure AW Series
(Food Grade Status: H-1)

CAMCO® Pure AW Hydraulic Series

CAMCO® Pure AW Hydraulic Series are custom blended highly refined chemically inert lubricants with additives for improved lubricity and defoaming characteristics. Additives include anti-wear for use in hydraulic systems and other applications where an anti-wear lubricant is desired.

Widely used for applications in the food processing industry where the lubricant has indirect contact with food substances.

Applications

  • General purpose lubricant for long life and anti-wear
  • Lubricant and sealing fluid for rotary mechanical shaft seals of processing pumps and agitated kettles
  • Lubricant/coolant for compressors
  • Energy saving gear applications
  • Hydraulic systems including fork lift trucks

CAMCO® Pure AW Series lubricants meet 21 CFR178.3570 requirements for lubricants with the possibility of indirect food contact. Authorized by USDA for use in Federally inspected meat and poultry plants for incidental food contact (H-1).

09/16

CAMCO® PURE AW SERIES TYPICAL PROPERTIES *

@ 100°C cs 5.7 6.5 9.0 12.0 14.9
@ 40°C cs 35.0 43.0 68.0 105.0 130.0
Viscosity Index 103 101 104 104 115
Pour Point °F -49 -49 -33 -22 -6
Flash Point C.O.C. °F ASTM D92 410 432 450 491 485
Weight lb/gal 77°F 7.19 7.21 7.23 7.23 7.2

*These values are not intended for use in preparing specifications.