CAMCO FMO-7 Series

CAMCO FMO-7-220 | CAMCO FMO-7-320 | CAMCO FMO-7-460

CAMCO FMO-7 Series products are custom-blended polyalphaolefin (PAO) synthetic hydrocarbon fluids giving improved lubrication at high and low temperatures, reduced volatility, and compatibility with mineral oils and equipment designed for use with mineral oils.

CAMCO FMO-7 Series products are long life lubricants formulated especially for applications where antiwear and extreme pressure properties are needed for effective load carrying ability. Recommended for gears and bearings.

Authorized by USDA for use in federally inspected meat and poultry plants (H-1). Complies with FDA 21 CFR 178.3570 – lubricants with incidental food contact.

CAMCO FMO-7-68 | CAMCO FMO-7-100 | CAMCO FMO-7-150

CAMCO FMO-7 Series products are custom-blended polyalphaolefin (PAO) synthetic hydrocarbon fluids giving improved lubrication at high and low temperatures, reduced volatility, and compatibility with mineral oils and equipment designed for use with mineral oils. CAMCO FMO-7 Series products are long life lubricants formulated especially for applications where antiwear and extreme pressure properties are needed for effective load carrying ability. Recommended for gears and bearings. Authorized by USDA for use in federally inspected meat and poultry plants (H-1). Complies with FDA 21 CFR 178.3570 – Lubricants with Incidental Food Contact. CAMCO FMO-7-680

CAMCO FMO-7-680 is a fully formulated synthetic gear and bearing lubricant based on synthetic hydrocarbons. The CAMCO FMO-7-680 gear and bearing lubricants have excellent thermal and oxidative stability, combined with superior gear load carrying ability.

The synthetic hydrocarbon base fluid has proved in extensive field evaluation to give extended service life and overall economic benefits. Synthetic hydrocarbons combine high viscosity indexes, high film strength and excellent mechanical shear resistance even in heavily loaded applications. Additives provide superior oxidative stability corrosion protection and load carrying ability. Field test reduction in heat build-up due to friction. The reduced friction may also reduce horsepower requirements up to ten percent depending on other operating and environmental conditions. Other advantages include improved cold temperature fluidity. Good high temperature oxidation and thermal stability (operating limits are typically 100°F higher than mineral oils). Low volatility and compatibility with mineral oils.

Authorized by USDA for use in Federally inspected meat and poultry plants (H-1). Complies with FDA 21 CFR 178.3570 – Lubricants with Incidental Food Contact.

CAMCO Lubricants
Phone: 763.205.0828
Fax:763.432.9295
1544 134th Avenue NE
Ham Lake, MN 55304

Copyright © 2014 CAMCO Lubricants. All Rights Reserved.